Deutsch English

Lightware

MMX4x2-HT200

4x2 Matrix Switcher with TPS and HDMI Inputs and Breakaway Analog Audio

Mehr Ansichten

Lightware
MMX4x2-HT200
4x2 Matrix Switcher with TPS and HDMI Inputs and Breakaway Analog Audio
Bitte loggen Sie sich ein um Ihren Preis zu sehen
Beschreibung

Details

MMX4x2-HT is a uniquely mini size matrix switcher. It has three HDMI inputs and one HDBaseTTM compatible TPS input port. It has two independent HDMI outputs. Audio can be de-embedded from the HDMI signal to a balanced 5-pole Phoenix (Euroblock) port and external audio signal can be embedded into the HDMI stream from another 5-pole Phoenix input port. The volume and gain properties of the audio signal can be modified at both input and output. The unit is fully 4K/UHD/3D capable and HDCP compliant. The device has a built-in Event Manager configurable via the Lightware Device Controller software. Further control options are served by the USB, RS-232, IR (in and out) and Ethernet ports.

Event Manager

The Event Manager is a smart, built-in feature in the Lightware HDBaseT compatible TPS extender family, the MODEX line and in some select matrix switchers like the MMX4x2 series units. The feature is available through the freely downloadable Lightware Device Controller software. The Event Manager was developed to handle tasks from the most simple to expert ones, like controlling the rolling shutter, the air conditioning system or the lights based on any condition changes on the media ports, such as a new source being connected or removed. Event Manager application is continuously updated with additional features via firmware upgrades: a delay can be added between the condition and the action and more actions can be triggered by a single condition change. With the help of the ‘condition count’ and ‘action test’ features, the predefined settings can be tested before going live. The system can recognize infrared commands which can also be set as conditions, and commands can also be sent via Ethernet.

 

Event Manager Wizard

Assigning an action to a condition is quick and easy with the Wizard function of Event Manager. The most typical examples of the currently selectable conditions and actions within the Event Manager Wizard are the following:

 Conditions  
 Video  Signal is detected on a port
 Video  Signal is not detected on a port
 Audio  Signal is detected on a port
 Audio  Signal is not detected on a port
 Audio  Signal type changes to 2 CH PCM
 Audio  Signal type changes to Multichannel PCM or Compressed
 Audio  Signal type changes to Undefined (no signal)
 IR  Infra code recognized
 General  TPS link state changes to Connected
 General  TPS link state changes to Disconnected

 

 Actions
 Ethernet  Send TCP command
 Ethernet  Send UDP command
 R232  Send RS232 message
 EDID  Switch EDID
 Audio  Set audio volume
 Audio  Mute output
 Audio  Unmute output
 Audio  Increase/decrease volume
 Video  Switch input to output
 Video  Enable autoselect on output
 Video  Disable autoselect on output
 Video  Load crosspoint preset
 Audio  Source select
Zusatzinformation

Zusatzinformation

Allgemein

Artikelnummer 8622-0441-01
Hersteller Lightware
Lieferzeit 2- 14 Tage

Eigenschaften

Eigenschaften
  • 4x2 Matrix Switcher with HDMI 1.4 and TPS ports
  • 4K/UHD (30Hz RGB 4:4:4, 60Hz YCbCr 4:2:0) and 3D capabilities
  • Video inputs: 1x HDBaseTTM Compatible TPS input, 3x HDMI 1.4 inputs
  • Video outputs: 2x HDMI 1.4 outputs
  • Audio ports: 1x 5-pole Phoenix connector for balanced analog audio embedding, 1x 5-pole Phoenix connector for balanced analog audio de-embedding
  • Analog audio volume control
  • Embedded 7.1 HBR audio support
  • Event Manager
  • Intuitive Control Software
  • Bi-directional RS-232, IR and Ethernet extension over TPS
  • Command injection on IR and RS-232 connections
  • Fully HDCP compliant
  • Advanced EDID Management
  • HDBaseTTM compatibility
  • Zero frame delay
  • Frame detector
  • Compact size
    * Depends on cable category and quality
Reichweite 170 m
HDbaseT 5-Play
HDCP compliant Ja
3D fähig Ja
4K fähig Ja
Steuerung RS-232, USB, IR

Inputs

HDMI IN 3x
Audio IN 1 x 5 pole Phoenix
CATx IN 1x

Outputs

HDMI OUT 2x
Audio OUT 1 x 5 pole Phoenix
Downloads

Downloads

Datenblattpdfd//hdmi4x2-ht200_vd-eu.pdf (1.79 MB )