Deutsch English

ZeeVee

ZVSync

HD Digital Video Tuner / Decoder DVB‐T2

Mehr Ansichten

ZeeVee
ZVSync
HD Digital Video Tuner / Decoder DVB‐T2
Bitte loggen Sie sich ein um Ihren Preis zu sehen
Beschreibung

Details

ZvSync is a digital cable tuner with HDMI, composite, and analog RF outputs. Available in both DVB-T and QAM.
It’s small, affordable, and it can be used for:

• Projectors
• HDTVs Without Tuners
• Monitors
• Old TVs With No Digital Tuner

Specifications

• Tuner: Input Frequency 48-862MHz;
• RF Input level -20 to -82dBm;
• IF Bandwidth 6,7, and 8MHz;
• Modulation QPSK, 16QAM, 64QAM,
• 256QAM, DVB-T, DVB-T2.
• Video: Decoder Format MPEg4 AVC/H.264 HP@l4
• MPEg2 MP@Ml/Hl;
• Output Format 480i, 480p, 576i, 576p, 720p,
• 1080i, 1080p60Hz;
• Aspect Ratio 4:3, 16:9, Auto;
• Output Port HDMI(v1.3C), CVBS.
• Audio: Decoder Format MPEg-1(layer 1 & 2 & 3), wMA, AC-3;
• Audio Output Digital Audio over HDMI, RCAx2(l/R).
• USB2.0: Supported Capacity Unlimited;
• Supported Media MP3, wMA, JPEg, BMP, AVI.
• Power: Supply Voltage (wall) 100-240 VAC 50-60 Hz
• Supply Voltage(ZvSync unit) 5 VDC;
• Maximum Power Consumption 10 W;
• Standby Power Consumption < 0.8 W
• Nominal Power Consumption 5 W

Firmware

Update Firmware via Front Panel:
If the unit is connected to the internet and has access to the ZeeVee servers you can update the firmware using the front panel by holding the left and right arrow buttons down at the same time. This should bring up an “update firmware” option. Use the arrow buttons to select it then press the ok button. If the option is grayed out the firmware is either up to date or the unit cannot connect to our servers.

Update Firmware via Maestro:
If the unit is not connected to the internet or can’t communicate with the ZeeVee servers, you can update the unit via the Maestro tool. We recommend first downloading the firmware file from this website simply find the correct model, click the link for the firmware and save it locally on your computer. As a note, this page will always list the most current firmware revision. Once the file is saved locally, via the Maestro tool go to the “Device” tab and click the “Update” button. From there you will be prompted to browse to the saved file.

As a note, the final step in the firmware update, no matter how it is started, is for the unit to reboot itself.
Zusatzinformation

Zusatzinformation

Allgemein

Artikelnummer 8653-0013-01
Hersteller ZeeVee
Lieferzeit 7-14 Tage

Eigenschaften

Eigenschaften Broadcast Receiver DVB-C DVB-T
Encoding MPEG-2
Protocol UDP/MPEG2-TS
Modulation DVB-T
Steuerung IR

Inputs

Audio IN analog Stereo Audio
RF IN 1x

Outputs

CV OUT 1x
HDMI OUT 1x
Audio OUT 1 x Analog Stereo
RF OUT 1x
Downloads

Downloads

Datenblattpdfzvpro_dvbc_brochure_vd-eu.pdf (762.72 KB )

Sie könnten auch an folgenden Artikeln interessiert sein

  • HDb2840
    ZeeVee

    HDb2840

    DVB-T/-C Modulator 4 x HDMI

    Bitte loggen Sie sich ein um Ihren Preis zu sehen